Here's the Trick to Make your Own Power Bank At Home

Now, there’s not much problem faced of low battery by smart phone lovers as power bank is the great option invented. Nevertheless, forgetting of charger or power bank is still in the habit. 

Even if you take power bank along with you, your luck never works with you as already your friends or family member had discharged the power bank. So here is a DIY to make your own power bank. You can thank us later, read out the steps first and let us know if it worked or not?

You will need 1 functional 9V battery and one extra battery

Source = Wittyfeed

Also get a small box too.

Source = Wittyfeed

Take out the switch from any old toy

Source = Wittyfeed

You will also need car’s USB charger.

Source = Wittyfeed

2-3 copper wires will work

Source = Wittyfeed

Also Read -iPhone 6S V/s 1000 Sparkles Burn Test - Watch Video

From the extra battery take out its head off

Source = Wittyfeed

Solder the copper wires onto the battery (on the head)

Source = Wittyfeed

Solder it in such a way that it gets fit over the functional battery

Source = Wittyfeed

Open the USB Charger (that car charger)

Source = Wittyfeed

Now connect all together in series the switch, head and the negatives terminals of the charger.

Source = Wittyfeed

Join positive end to the charger

Source = Wittyfeed

Make holes in the box such that USB and switch gets fixed in the box.

Source = Wittyfeed

Check whether if wires are correctly soldered into the box and battery is connected.

Source = Wittyfeed

Now connect the USB wire, to your phone

Source = Wittyfeed

Finally, your phone is charging!!

Source = Wittyfeed

Try these creative power bank and share with your friends too. It will help you in an emergency.